Recommended 12 inches but that is on a case by case basis.
High lift garage door conversion kit cost.
It s going to cost a bit more to do it right but it s going to be worth it in the end.
Have a standard 9x8 garage door that came with the building kit but he is installing a lift and wants a high lift track.
A high lift garage door kit should cost between 300 and 500 for the parts and an additional 300 400 for the labor to install it.
The way this works is a standard lift garage door is 12 inches or 1 foot.
Where do you guys get this stuff.
An extra piece of track will cost you maybe 20 total.
If your garage ceiling is 10 feet and your garage door is 16 7 then we can raise the garage door to a height of 9 feet.
You can view other options and prices at our garage door bearings and plates page.
High lift used when there is ample headroom over 30 and additional workspace clearance is required.
A high lift garage door conversion is a modification to an existing garage door s operating components to open at a higher level within the garage space.
Seems like a no brainer right.
A high lift garage door conversion is a modification of your existing garage door system to allow it to operate from a higher position.
We built with 12 tall walls so there is plenty of height.
If you need a shaft to convert to a high lift system we recommend buying a shaft locally from a steel supply center or a steel scrap yard.
This conversion is accomplished by adding new tracks new springs new drums and new cables all while utilizing your existing garage door.
Standard spring anchor bracket kits cost 7 50 and the end bearing plate kits cost 9 00.
In some application the high lift can be closer to the ceiling than the.
Often used to help track avoid obstacles in the garage such as an entry pass door or other structural elements.
Building my buddy a garage.
High lift doors can be any closer to the ceiling than 12 inches.
Because the garage door itself and the rough opening do not change if you have a 7 foot garage door you will still have a 7 foot garage door after the installation of a high lift conversion kit.
The only way to get a high profile vehicle into your garage is to remove the existing header and construct a new header above it which means you.
To convert this we will add 1 foot of lift to.
The knowledge and skill set needed to perform the conversion.
I can find stuff about them but don t really see where to get one easily and quickly.